1. 打开计算机电源后按 <F2> 或 <Del>
使用 < 键或 > 键选择菜单栏上的选项，并使用 ^ 键或 v 键上下移动光标以选择项目，然后按 进入子屏幕。 esc退出当前屏幕。
2. 超频工具，CPU配置， speedstep技术，禁用
3. 高级，CPU配置， 增强型空闲状态 (C1E)，禁用
4. 高级，芯片组配置，板载hdmi hd 音频，开启
5. 高级，芯片组配置，深度睡眠，在S4-S5开启
6. 高级，存储配置，sata模式，选择 AHCI
7. 高级，USB配置，intel usb3.0模式，开启
8.引导，引导选项 #1 UEFI：kingstonDT..
全屏徽标，禁用CSM(兼容性支持模块)，CSM，关闭
9. F10保存更改并退出
Set the SATA mode to AHCI. If Windows 8.1/8/7 is already installed under IDE mode, directly changing the SATA mode to AHCI may cause Windows8/7 to crash while booting. If your system is not in AHCI mode, please follow the instructions below.
1. Press Win + R simultaneously in Windows 8/7, type “Regedit” into the wordbox then click OK.
2. Enter into HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\
msahci in Windows Registry Editor. Double click on the value Start and change the value from 3 into 0. Click on OK.
3. Exit the Registry Editor window and restart the computer.
4. Press F2 to enter BIOS, then go to Advanced ‐> Storage Coniguration and change SATA Mode to AHCI. Press F10 to save changes and exit.
5. Enter Windows 8/7. Windows will discover the new device and install AHCI drivers automatically.
350 Views
